BUY UASURE STRIPS
Individually wrapped strips, for maximum shelf-life!  Nominally 12-months from manufacture.

UASure Gout - Uric Acid Test Strips

U3601
+Shipping
  • Description

For use with the UASure Uric Acid Meter.
(box of 25 with code chip)
Each box of 25 individually wrapped strips comes with its own code chip, which fits in the back of the meter.  For accurate readings, this must be inserted (after removing the previous one) when you start a new box of strips.
The maximum shelf life of each strip is 12 months, as each strip is wrapped in foil you get maximum life out of each box of strips. 
This is much, much more than if the strips were just loose in a cannister, where the "usage life" is only THREE MONTHS after first opening that cannister!

We can reimburse the VAT on these products to UK Residents after we receive the (exemption form required).

UASure Control Solution (optional)

U3500
+Shipping
 
  • Description

The standard uric acid concentration solution is used to perform the "Quality Control Testing” (see Chapter 2, p.13 of the handbook) to check for system accuracy, to practice the test procedure, and when using a new lot of UASure® Blood Uric Acid Test Strips.

Perform Quality Control Testing:

  • When you first get your meter, before performing a blood uric acid test.
  • When you first begin to use a new package of UASure® Blood Uric Acid Test Strips.
  • When you suspect your UASure® Blood Uric Acid meter and test strips are not working properly.
  • When the blood uric acid results do not reflect how you feel.
  • When your test strips have been exposed to extreme temperatures (see UASure Blood Uric Acid Test Strip Insert for operation ranges).
  • To practice the test procedure.

 

IMPORTANT:

  • The acceptable range for the control solution is listed on the package of test strips.
  • Use only the UASure® Uric Acid Control Solution.
  • Always check the expiration date. DO NOT use control solution if expired.
  • Newly opened bottle of control solution must be marked with the date opened; discard any unused control solution three months after opening or expiration date.
  • Control solutions should be refrigerated after use. DO NOT FREEZE. When control solutions needs to be used again, allow it to stand under room temperature at least 30 minutes before use.
  • If a control solution test is not within the expected range that is printed on the test strip package, DO NOT use the system to test.  Repeat the test until a control solution test performs within the expected range. If the results continue falling outside the expected range, call the authorised dealer for service.
  • DO NOT touch the test area with the tip of the control solution bottle.
  • DO NOT apply a second drop of control solution to the test strip.
  • Replace the bottle cap on the control solution bottle immediately after use.

We can reimburse the VAT on these products to UK Residents after we receive the (exemption form required).

Meter Battery

I-1447
+Shipping
  • Description

CR2032 battery for Blood Glucose Meters (pack of 2).

This battery fits many meters in the UK.

The picture shows battery type and not necessarily the manufacturer.